Parts Checklist

Before you head out to the field, ensure that you have all of the components for the system, the tablet, gcs and battery are charged, and you've set up your mission.

Batteries

Prior to heading out to your flying site, it is always a good idea to ensure all of the batteries are charged including:

  • Flight pack battery (12.6V fully charged and balanced)
  • SwiftStation (8.4V fully charged and balanced)
  • Tablet (charged to 100%)
  • Check your RC Transmitter batteries to see if they are good still (6.0V-4.9V) replace if necessary.

Tool Kit

The red toolkit contains all of the fasteners, screw drivers, and other equipment needed to operate the aircraft and perform small repairs.

Philips screwdriver
Flathead Screwdriver
Lipo Tester
Blenderm
Allen Wrenches (3)
4 spare wing screws (2-black, 2-white)
Spare x-mount screws
Arming pin
Spare AA batteries (4)
Micro SD card USB sticks (2)
Transmitter neck strap
Spare GCS o-rings (2)
Pitot Cover with "Remove Before Flight" tag
Horzontal Stabilizer screws (2) and plate

S1 Case

The S1 case contains the aircraft and all other equipment required to successfully fly a mission. Prior to heading to the flying site ensure your case contains all of the following:

Fuselage
SD card in camera
SD card in SwiftPilot
Flight Batterie(s)
RC handset
Wings (2)
Horizontal Stabilizer
Tripod bag with tripod
X-mount (4 pieces total)
SwiftStation and Tablet
Chargers for SwiftStation and Tablet

Extras

DC/AC inverter with outlet plugs
Propulsion battery charger
Any Ground Control Points you want to utilize